Quiz on work at height – Safety quiz questionnaire


Quiz on work at height questionnaire – Safety quiz questionnaire
Quiz on work at height – Safety quiz questionnaire

Quiz on work at height – Safety quiz questionnaire


Safety quiz on working at height can be conducted frequently in the construction industries to raise awareness of safety precautions against the hazards of working at height.
Working at heights is the most dangerous activity because it carries a high risk and the majority of deaths worldwide in construction work due to falls from heights due to failure of fall protection measures. Each year, it has been observed that fall protection declares the most cited offense to the OHSA. Most accidents recorded due to failure to comply with fall prevention and protection system, such as unsafe scaffolding, unsafe use of ladder and lack of fall protection training.
The quiz on working at height safety measures followed by training is the best way to validate the training performance, the strengths and weaknesses of the participants.
Before appearing for the quiz, it is always best to learn some information on the subject and then practice the quiz to identify your strength and weakness.

What is meant by working at height?

Working at height means that there is a risk of falling from one level to a lower level, in particular to a height greater than 1.8 meters above the reference level and may cause physical or bodily injury.
Slips or trips at the same level and falls from a permanent staircase are not considered work at height.
Want to know more - click here

What are the OSHA regulations for working at heights?

According to OSHA, the employer must implement fall prevention and protection measures to prevent the fall of workers from elevated surfaces, elevated workstations, scaffolding, cradles or into holes, pits, openings in surfaces / floor.
Fall prevention and protection must be implemented for work at elevation of 4 feet in general industries while in construction industries it is 6 feet. The same requirement applies to shipyards, but the drop distance is 5 feet and for long shoring operation it is 8 feet.
Regardless of the fall distance, fall prevention and protection should be implemented when working on dangerous machinery and equipment where there is a risk of falls.

What are the conditions to be declared as work at height?

1. In case of risk of falls from elevated surfaces.
2. If there is a risk of the unprotected edge, opening or fragile surface.
3. If there is a risk of falling into the hole or into the opening of the ground/ floor.

What must the employer do to avoid falls from a height?

1. Provide cover or guards to opening or hole in surfaces where there is a risk of falls.
2. Provide edge fall protection such as guardrails and toe boards around elevated platforms, roofs, crossovers, floors, excavated areas, etc. to avoid falls.
3. If there is a risk of falling into dangerous machinery such as conveyor belt, crusher, acid tank, etc., provide guardrails regardless of the fall distance.
4. Personal fall protection aids such as full body harnesses, connectors, lifelines, safety nets, etc. must be provided in accordance with the Fall Protection Plan.
Learn more about working at height hazards, risks and control measures - click here
After gaining knowledge, test your knowledge by taking the quiz below on working at height.

SAFETY QUIZ

QUIZ ON WORKING AT HEIGHT

quiz in Javascript

Question of

Good Try!
You Got out of answers correct!
That's



Hope you enjoyed the quiz on working at height, you can write your suggestions in comment box for further improvement.

Summary


The Working at Heights Quiz provides great materials to test your knowledge to find strength and weakness for further improvements. It helps to find the identification of training needs and to make the participant the most competent. This quiz can be used to validate the performance of the training and thus becomes the important part of the learning process.

Working at height is the most dangerous work because it poses a high risk of personal injury. A suitable fall protection system must be provided after careful evaluation of the hazard and risk and adopt the best safe work practices such as work permit system with competent supervision to prevent the injuries.

Guardrails and personal fall arrest system with other accessories can prevent falls. Training and education on safety best practices for controlling falls injuries is important at workplaces. Quiz on working at height helps to identify the strength and weakness thus validating the learning outcome. 

Categories:
SIMILAR QUIZZES

0 Comments:

Please do not add link in the comments, it will be treated as spam comments